This year was absolutely brutal for my garden. At the end of the season I had 6 peppers (2 sweet) and 6 tomatoes (out of 40) that had survived without fruiting.
I decided to bring these survivors inside to see if I can get seeds from them.
There is another hydroponics post, but since it was last updated in 2023 I figured I would start my own.
My indoor garden is a modified Kratky system, set up near a sunny south-facing window and with 14 hours of supplemental light. It is self-leveling via hoses that go into a central reservoir.
There are several potted plants as well, including the two sweet peppers.
The Kratke system currently holds 2 cucumbers, 4 hot peppers, and 4 tomatoes, 2 determinate and 2 indeterminate. These plants are not normally considered appropriate for Kratke.
This is where “modified” comes in. In a standard Kratke system each plant stands alone. The nutrients are put in, the plant is put in, and over time the plant drinks down the water, developing specialized air and water roots. By the time the reservoir is empty, the plant, usually greens or some kind of herb, has been harvested. Heavy users like tomatoes will run dry before they have a chance to fruit. If you try to refill the reservoir, the specialized air roots drown and the plant dies.
To solve this problem many people link the system to a reservoir or use float valves to keep the reservoir topped up at a certain level. I chose to use an entirely passive “siphon” system which keeps all the buckets at the same water level. I top up once a day, nutrients and water both go into the central reservoir.
Currently the tomatoes, cucumbers and peppers are fruiting.
I use homemade nutrients. You don’t have to and most people won’t, but I can source my entire system from my property. That’s important to me.
I won’t bore you with the last 15 years of tests and trials and dead plants. The current base is a mix of wood ash and clay, neutralized with vinegar and topped up with water. I use only the liquid portion, currently 1 quart 3 times per week. This provides potassium, calcium, and a number of micronutrients.
A nitrogen source also 3 times per week, and only during bloom and fruiting a weekly 1/4 teaspoon of an aged almond shell ferment for phosphorus.
The nutrients are a work in progress. I think I’ve got the system itself pretty well dialed in.
Using this system I have at least a chance of saving the genetics of plants that survived 2 months of 100+ degree heat, in heavy clay soil, with no supplemental water.
They didn’t produce, but they survived. Others produced a single small fruit and then died. I have kept those seeds as well.





